Smps (Also Known As Power Supply Unit) - Ricoh B173 Service Documentation

SMPS (ALSO KNOWN AS POWER SUPPLY UNIT)

3.11 SMPS (ALSO KNOWN AS POWER SUPPLY UNIT)
1. Before you remove the SMPS, you must remove these:
• Rear cover (! 3.2)
• Side covers (! 3.3)
• Scanner Ass'y (! 3.5)
• Engine shield ass'y (! 3.9)
2. Remove the three screws from the inlet
bracket [A]. Then remove it
3. Disconnect one connector. Then
remove the one screw from the engine
shield.
4. Remove the three screws from the
SMPS [B]. Then remove the SMPS.
B173
[B]
3-18
[A]
B173R939.WMF
B173R940.WMF
B173R941.WMF
SM