Caution For Safety - Ricoh B173 Service Documentation

CAUTION FOR SAFETY

PRECAUTION RELATED NOXIOUS MATERIAL
It is possible to be harmed from noxious material if you ignore the below
information.
1. Do not touch the damaged LCD. Noxious liquid to a human body exists in the
LCD. If it is got into the mouth, immediately see a doctor. If it gets into the eyes
or on the skin, immediately wash off with flowing water for 15 minutes and then
see a doctor.
2. The toner in a printer cartridge contains a chemical material, if swallowed,
might harm a human body.
Please keep the toner cartridge away from children.
PRECAUTION RELATED ELECTRIC SHOCK OR FIRE
It is possible to get an electric shock or burn by fire if you don't follow the
instructions of the manual.
1. Use the exact voltage and wall socket. If not, a fire or an electric leakage can
occur.
2. Use an authorized power cord. Use the power code supplied with machine. A
fire can occur when an over current condition flows in the power cord.
3. Do not insert many cords into an outlet. A fire can occur due to an over current
condition in the outlet.
4. Do not put water or other liquid, pin, clip, etc in the machine. It can cause a fire,
electric shock, or malfunction. If this occurs, immediately turn off the power off
and remove the power plug from outlet.
5. Do not touch the power plug with a wet hand. When servicing, remove the
power plug from the outlet.
6. Use caution when inserting or unplugging the power plug. The power plug has
to be inserted completely. If not, a fire can occur due to a poor contact. When
unplugging the power cord, grip the plug, not the wire.
7. Do not bend, twist, bind or place other materials on the power cord. Do not use
staples around machine. If the power cord becomes damaged, a fire or electric
shock can occur. A damaged power code must be replaced immediately. Do
not attempt to repair the damaged cord or reuse it. Repairing the cord with
plastic tape can cause a fire or electric shock. Do not spread chemicals or
insecticide on the power cord
8. Check whether the power outlet and the power plug are damaged, compressed
or cracked. When such inferiorities are found, replace it immediately. Do not roll
over the cord when moving the machine.