Cannot Receive By Alias Fax Number - Ricoh D129 Service Manual

Cannot receive by Alias Fax number.

Check Point
1 LAN cable connected?
2 Firewall/NAT is installed?
Gatekeeper/SIP server installed
3
correctly?
Power to Gatekeeper/SIP server
4
switched on?
IP address/host name of
5 Gatekeeper/SIP server correct on the
sender's side?
DNS server registered when
6 Gatekeeper/SIP server host name
specified on sender's side?
Enable H.323/Enable SIP SW is set to
7
on?
SM
Action
Check the LAN cable connection.
Cannot the breach firewall. Request the
remote fax to send by using another
method (Fax, Internet Fax)
Contact the network administrator.

The sender machine displays this
error code when the sender fax is
a Ricoh model.
Contact the network administrator.

The sender machine displays this
error code when the sender fax is
a Ricoh model.
Request the sender to check the IP
address/host name.

The sender machine displays this
error code when the sender fax is
a Ricoh model.
Contact the network administrator.

The sender machine displays this
error code when the sender fax is
a Ricoh model.
Request the sender to check the settings.
User Parameter SW 34 Bit 0/SW 34 Bit 1

Only if the remote sender fax is a
Ricoh fax.
51
IP-Fax Troubleshooting
D629