Ghost (1); Ghost (2); Ghost (3) - Ricoh B173 Service Documentation

Table of Contents

Description

Ghost occurs at 75 mm intervals of the OPC drum in the whole

printing. (When printing on card stock or transparencies using

manual feeder)

Check and Cause

When printing on card stock thicker

than normal paper or transparencies

such as OHP, higher transfer voltage is

required.

Description

White ghost occurs in the black image printing at 32 mm

intervals.

Check and Cause

The life of the developer may be

expired.

The abnormal voltage and bad contact

of the terminal of the supply roller

B173

PRINTING QUALITY PROBLEMS

Solution

Select "Thick Mode" on paper type

menu from the software application

and after use, we recommend

returning to the original Mode.

Problem in the toner cartridge, replace

the AIO and try to print again.

Check the approved voltage of the

supply roller and contact of the

terminal and adjust if necessary.

4-28

Digital Printer

B173T923.WMF

Digital Printer

B173T924.WMF

Solution

Table of Contents

Ac104