ERROR MESSAGES
4.10 ERROR MESSAGES
The display on the front panel shows the messages to indicate the printer's status
or errors. Refer to the tables below to understand the message's meaning and
clear the problem if necessary. Message details are shown in alphabetical order.
BYPASS JAM
Description: The machine detects non-feed from bypass tray.
Solution: Open the side cover. Then clear the jam.
COMM. ERROR
Description: Facsimile communication problem.
Solution: Try again.
DOCUMENT JAM
Description: Document jams in the feeder when document jam occurs at ADF
Solution: Clear the document jam.
DOOR OPEN
Description: Side cover is not correctly closed.
Solution: Close the cover correctly.
GROUP NOT AVAILABLE
Description: You have tried to set a group location when you can only set a single
location number. This can occur when you try to add locations for multi-dial
operation.
Solution: Try again. Check group location.
HEATING ERROR
Description: Temperature does not go up at the time of operation.
Solution: Check thermistor contact point and heating lamp.
LINE BUSY
Description: Remote fax did not answer
Solution: Try again.
SM
4-39
B173