Draytek Vigor2760Vn Quick Start Manual page 15

3. If required, connect the Phone ports to a regular analogue telephone (for
Vn model only). Cordless DECT base stations are also compatible.
4. Connect the antennae to the router for Vigor2760 series (for n models
only). Attach them firmly but do not over-tighten.
5. Connect the power cord to the power port. Plug the PSU into the mains
wall outlet.
6. Turn on the router (the power switch is on the rear of the router).
7. Check the ACT and DSL, LAN LEDs to assure network connection.
Wireless Connection: If you have a Vigor 2760n or Vigor
2760Vn then you can connect to it from any wireless-equipped
device (PC, tablet etc.). The default SSID (network name) and
encryption password is printed on the bottom of your router.
Vigor2760 Series Quick Start Guide
7