Installing Your Router; Hardware Installation - Draytek Vigor2760Vn Quick Start Manual

2 . I n s t a l l i n
2 . I n s t a l l i n
This section will guide you to install the router including hardware
connection and configuring the router's settings through your web browser.
Firstly, be sure of what type of Internet connection you have:
Connection
ADSL
VDSL
Ethernet
3G/4G Modem
Note: 'xDSL' means either ADSL or VDSL. Several ISPs refer to their
VDSL service as 'Fibre' even though it's delivered to you by copper wires to
your regular phone socket. Actual Fibre To The Premises (FTTP) is
relatively rare in the UK so most ISPs really mean copper/VDSL (Fibre To
The street Cabinet). The Vigor2760 is not compatible with actual fibre.
2 . 1 H a r d w a
2 . 1 H a r d w a
1. Connect the xDSL interface to the external xDSL splitter (microfilter)
with an xDSL line cable. With the Vigor2760Vn, also connect the Line
interface to the phone port on the xDSL splitter.
2. Connect Port 1 of the 4-port LAN switch to your computer with the
supplied RJ-45 cable. The router allows you to connect up to 4 PCs
directly (or 3 if you are using WAN2).
Vigor2760 Series Quick Start Guide
g Y o u r R o
g Y o u r R o
Port
WAN1
(RJ-11)
WAN1
(RJ-11)
WAN2
(RJ-45)
WAN3
(USB)
r e I n s t a l l a t i
r e I n s t a l l a t i
u t e r
u t e r
Description
ADSL/ADSL2+ Service
VDSL Service (FTTC/BT Infinity™).
Some ISPs (incorrectly) call this 'fibre broadband'
If your Internet comes in via another
modem or other RJ-45 connection you can
use WAN2 instead of xDSL.
Using a compatible modem, you can use
3G/4G networks for backup (failover) to
your primary Internet connection. Check
for a list of compatible modems.
o n
o n
6