Copying A Frequency Into A Vacant Channel; Copying A Frequency Into The Priority Channel - Radio Shack 20-427 PRO-2054 User Manual

Beyond the Basics

copying a frequency into a vacant channel

You can copy a frequency into a vacant channel
in a bank you specifi y when the scanner stops on
the frequency during search or tune mode.
1. Press FUNC then ENT when you fi nd a frequency
you want to copy. b-10 briefl y appears (default
setting), then a vacant channel number
appears.
To copy the frequency into bank 10, press
2.
ENT. The scanner stores the frequency in the
fi rst available vacant channel in the bank.
Otherwise, enter any bank number then press
ENT to store the frequency in the selected
bank. Channel number and frequency fl ashes
2 times. All the conditions such as delay
condition are copied on the channel. After
about 2 seconds, the scanner automatically
returns to search mode.
3. If you try to copy a frequency which is already
stored, the scanner sounds the notice tone
3 times after you press ENT. –dUPL– appears.
If you want to copy the duplicate frequency
anyway, press ENT, or if not, press CLEAR to
cancel.
copying a frequency into the
priority channel
You can copy a frequency into the priority channel
(see "Priority") when the scanner stops on the
frequency during Search, Scan, Manual, Tune, or
WX mode.
Press FUNC then PRI when the frequency appears.
28