Copying A Frequency Into A Vacant Channel In A Specified Bank; Coping A Frequency Into The Priority Channel - Radio Shack PRO-96 Owner's Manual

C F
OPYING A REQUENCY
V
INTO A ACANT
C
HANNEL IN A
B
ANK
You can copy a frequency into a
vacant channel in a specified bank
when the scanner stops on the
frequency during search or tune
Ô
mode.
1. Press , and then
FUNC
when you find a frequency
you want to copy.
appears in the scanner's
display.
2. If you want to copy the
frequency into bank 9, press
. It is stored in the first
ENTER
available vacant channel in
the bank. Or, press your
desired bank number to store,
then press
ENTER
frequency in the selected
Chan Store!
bank.
seconds. All the conditions
such as receiving mode and
delay condition are copied on
the channel. After about 2
seconds, the scanner
automatically returns to
search mode.
C F
OPING A REQUENCY
P
INTO THE RIORITY
C
HANNEL
You can copy a frequency into the
priority channel (see
"Programming the Priority
Channel" on Page 40) when the
scanner stops on the frequency
during Search, Scan, Manual,
Tune, or WX mode.
S
PECIFIED
ENTER
If you try to copy a
frequency that is already
Bank9 Store?
stored in the same
baqnk, the scanner
sounds the notice tone 3
times after you press
ENTER.
appears at the bottom
line. If you want to copy
the duplicate frequency
anyway, press ENTER,
or if not, press CLR to
cancel.
to store the
appears for 2
Ô Ô
NOTE
Dupl.f Chxxx
63