Manually Tuning A Frequency - Radio Shack 20-427 PRO-2054 User Manual

manually tuning a frequency

You can manually set the scanner to move
through all receivable frequencies, or select a
specifi c frequency as a starting point.
1. Press TUNE. The currently-tuned frequency
appears. And, PSE and –t– (if zeromatic is on)
appears alternately.
Use the number keys to enter the frequency
2.
where you want the scanner to start.
Press ENT.
3.
Press PAUSE or TUNE. The scanner starts the
4.
tune operation. To change the tune direction,
press  or  to tune up or down. When the
scanner fi nds an active frequency, it stops on
the frequency.
You can press FUNC TUNE while the scanner is
5.
stopped on a frequency in MANUAL mode to
begin the TUNE function from that frequency.
For example, if the scanner is stopped
in MANUAL mode on channel 144 with
frequency 145.31000 MHz, pressing FUNC TUNE
will enter TUNE mode and automatically set
the TUNE frequency for 145.31000 MHz.
21
The Basics