Programming The Priority Channel Directly; Programming A Weather Channel As The Priority Channel - Radio Shack 20-427 PRO-2054 User Manual

programming the priority channel directly

1. Press PROG.
2. Press PRI.
3. Enter the frequency you want to enter into the
priority channel and then press ENT.
programming a weather channel as the
priority channel
1. Press WX.
2. Select the weather channel you want to
program as the priority channel.
3. Press FUNC then PRI. PCH fl ashes.
4. Press ENT to store the frequency and the
display blinks two times. If you want to cancel
the operation, press CLEAR.
To turn on the priority feature, press PRI while
scanning/searching (except WX band). P appears
on the display. If the scanner detects activity
on the priority channel, PCH appears. Or if you
program a weather frequency into the priority
channel and the scanner detects a weather alert
tone in Priority WX mode, PCH ALErt appears for
2 seconds. Then, ALErt fl ashes and the scanner
sounds an alert tone.
Priority WX is only for receiving a weather alert. Priority WX is only for receiving a weather alert.
NOTES
When the scanner detects a 1050 Hz alert tone, When the scanner detects a 1050 Hz alert tone,
priority WX activates and you receive a weather priority WX activates and you receive a weather
alert.
To turn off the priority feature, press PRI.
Beyond the Basics
43