Copying A Frequency Into A Vacant Channel In A Specified Bank; Copying A Frequency Into The Priority Channel; Scanning The Channels - Radio Shack PRO-93 Owner's Manual

Copying a Frequency into a Vacant
Channel in a Specified Bank
You can copy a frequency into a vacant channel in a
specified bank when the scanner stops on the frequency
during search or tune mode.
1. Press
FUNC
you want to copy.
2. If you want to copy the frequency into bank 9, press
. It is stored in the first available vacant chan-
ENTER
nel in the bank. Or, press your desired bank number
to store, then press
for 2 seconds. All the conditions such as receiving
mode and delay condition are copied on the chan-
nel. After about 2 seconds, the scanner automati-
cally returns to search mode.
3. If you try to copy a frequency which is already
stored, the scanner sounds the notice tone 3 times
after you press
bottom line. If you want to copy the duplicate fre-
quency anyway, press
cancel.
Copying a Frequency into the Priority
Channel
You can copy a frequency into the priority channel (see
"Priority" on Page 44) when the scanner stops on the fre-
quency during Search, Scan, Manual, Tune, or WX
mode.
Press then
FUNC
play. The display flashes twice and the frequency is cop-
ied to the priority channel.

SCANNING THE CHANNELS

To begin scanning channels or to start scanning again
after monitoring a specific channel, press
Note: You must store frequencies into channels before
the scanner can scan them. The scanner does not scan
through empty channels.
40
then when you find a frequency
ENTER
â8EBéý/K â8EBéý /KFI<å FI<å
â8EBéý â8EBéý /K /K FI<å FI<å
.
ENTER
.
ENTER LGCô=ýá?OOO LGCô=ýá?OOO
LGCô=ýá?OOO LGCô=ýá?OOO
ENTER
when the frequency is on the dis-
PRI
Operation
appears.
appears
á?8Eý /KFI<ü á?8Eý /KFI<ü á?8Eý /KFI<ü á?8Eý /KFI<ü
appears at the
, or if not, press
.
SCAN
to
CL