Copying A Frequency Into A Specifi Ed Channel - Radio Shack 20-427 PRO-2054 User Manual

Once you fi nd interesting frequencies during the
search, you can store them into the scanner's
channel-storage banks.
copying a frequency into a
specifi ed channel
You can copy a frequency into a specifi ed channel
when the scanner stops on that frequency during
search mode or manual tuning.
1. Press FUNC then PROG when you fi nd a
frequency. ChAnnEL appears on the display.
After about 2 second, the channel to be
copied fl ashes.
2. Press the channel number where you want
to store the frequency. The display indicates
channel number.
3. Press ENT. The scanner displays information
about the channel (frequency or 000.0000).
4. Press ENT. All the conditions, such as delay
condition, are copied onto the channel.
Channel number and frequency fl ashes two
times. The scanner automatically returns to
search mode.
If you try to copy a frequency that is already If you try to copy a frequency that is already
NOTE
stored, the scanner sounds the notice tone 3 stored, the scanner sounds the notice tone 3
times after you press times after you press ENT.
want to copy the duplicate frequency anyway,
press ENT, or if not, press ENT, or if not, press
ENT
Beyond the Basics
ENT –dUPL– appears. If you
ENT.
CLEAR to cancel.
27