Connect An External Speaker Or Headphones - Radio Shack 20-427 PRO-2054 User Manual

Your local RadioShack store sells a variety of
antennas. Always use 50-ohm coaxial cable, such
as RG-58 or RG-8, to connect an outdoor antenna.
For lengths exceeding 50 feet, use RG-8 low-loss
dielectric coaxial cable. If your coaxial cable does
not have a BNC connector, you will also need a
BNC adapter (not supplied).
WARNING: Use extreme caution when WARNING:
NOTE
installing or removing an outdoor antenna. installing or removing an outdoor antenna.
If the antenna starts to fall, let it go! It If the antenna starts to fall, let it go! It
could contact overhead power lines. If the
antenna touches a power line, touching the
antenna, mast, cable, or guy wires can cause
electrocution and death. Call the power
company to remove the antenna. Do not
attempt to do so yourself.
connect an external speaker or
headphones
When you mount your scanner in your
dashboard, you will need to connect an external
speaker or headphones.
Connect
headphones here
Connect external
speaker here
17
The Basics