Basic Operation - Rinnai V2532FFUC Manual

B
1
Adjusting Temperature
The setpoint temperature of the
Integrity V2532(C) can only be adjusted
by the user using the Remote Control.
To adjust the setpoint temperature of the
Integrity V2532(C), all hot water taps
must be closed, and all circulating
pumps turned off.
TEMPERATURE CANNOT BE
ADJUSTED WHEN ANY HOT
WATER TAP IS OPEN, OR
WATER IS FLOWING THROUGH
THE WATER HEATER.
Simply press the
until the required temperature is
displayed on the Digital Monitor.
The Remote Control will display the water heaters
current setpoint temperature. There is a hot water scald
potential if the thermostat is set to high.
CHECK LOCAL CODES FOR THE MAXIMUM
WATER TEMPERATURE SETTING ALLOWED
WHEN USED IN NURSING HOMES,
SCHOOLS, DAY CARE CENTERS, AND ALL
OTHER PUBLIC USE APPLICATIONS.
Rinnai recommends fixing the water heater setpoint
temperature at 108°F for ALL public use applica-
tions.
Model V2532FFUC
A S I C
or button
140°F
O P E R
2
To operate the Integrity V2532(C) simply turn
any hot water tap on, or initiate water flow
through the unit with a circulating pump. This
will automatically light the burner providing hot
water at the preset temperature. If the remote
control has been installed, the green IN USE
indicator will glow on the remote control.
Note: The Rinnai water heater will not provide
hot water instantly at the hot water fixtures.
Any cold water existing in the hot water lines
must be purged first.
9
A T I O N
www.rinnai.us