Table of Contents
Advertisement
Advanced Settings - User ADC Calibration
1
When using VGA as a signal source, go to
select
VGA ADC SETTINGS
2
A warning message (see image below) will appear to help you ensure that the
correct image is displayed on screen before ADC calibration begins.
a
The image in the green boxes, displayed on both side of the screen, has to be
white and black in order to run the calibration accurately (the black and white
image can be made using software like Microsoft Paint).
b
The white in the left green box has to be the brightest white.
c
The black in the right box has to be the darkest black.
3
After the correct image is displayed, click "Yes" to begin ADC calibration.
EP5804K, EP5804K-T, EP6504K and EP6504K-T User Manual
ADVANCED SETTINGS
and then select
USER ADC CALIBRATION
Advanced Settings Menu
in the OSD menu,
.
57
Advertisement
Table of Contents
