Reset Device - Planar EP5804K User Manual

Your network administrator must provide information for the following fields:
You can edit the subject and body of the email warnings, which are sent when there
is a power status change, source change and signal lost. The SMTP 04 and 05
warnings are not used.

Reset Device

Click the
settings are not changed.
• Enable SMTP - Make sure this checkbox is checked. Port 25 is the default.
• SMTP Server Address - Name or IP address of the mail server.
• SMTP Login Information - If required, check the
username and password.
• Mail to - Enter the destination email addresses. Separate multiple addresses
with a semi-colon.
• Mail from - Enter the email address from which you want to send alerts.
button to reboot the network interface. Note that the current
RESET
EP5804K, EP5804K-T, EP6504K and EP6504K-T User Manual
box and enter a
ENABLE
Reset Device
83