Planar EP5804K User Manual page 59

Advanced Settings Menu
IRFM
Creates slight frame motion to help avoid image retention.
Options: Off, On
Baud Rate
Options: 115200, 38400, 19200, 9600
Smart Light Control
DCR (Dynamic Contrast) varies the LCD backlight automatically, depending on
content, to improve black levels and contrast.
Options: Off, DCR, Light Sensor
Wake Up From Sleep
Allows you to configure the display to "wake up" when it receives a digital signal
through the DisplayPort, HDMI or DVI connectors. With VGA Only, the display can
only "wake up" by sending an analog video signal through the VGA connector.
Options:
Never Sleep - The display will never enter a power saving mode.
VGA Only - The display will enter a power saving mode if it cannot sync for five
minutes with the DisplayPort, HDMI or DVI. If the sync is present, the display
will "wake up" again.
VGA, Digital, RS232 - The display will enter a power saving mode if it cannot
sync for five minutes with any source.
Ethernet Setup
Configure Network settings. See "Setting Up Email Alerts" on page 77 for more
information.
Multi-Display Control
Used for displaying one image across multiple displays.
EDID Setup
Enables EDID over various formats.
Touch Control
Selects the touch control surface.
Options: Auto, OPS, External
EP5804K, EP5804K-T, EP6504K and EP6504K-T User Manual 53