Outline Of Operation Control By Microcomputer; Operation Control Function By Remote Control Switch - Mitsubishi Heavy Industries SRK20ZG-S Tech Manual

Inverter wall mounted type room air-conditioner ( split system, air to air heat pump type )
Hide thumbs Also See for SRK20ZG-S:
Table of Contents

Advertisement

4 OUTLINE OF OPERATION CONTROL BY MICROCOMPUTER

4.1 Operation control function by remote control switch

Remote control
Models All models
S Operation section
FAN SPEED button
Each time the button is pushed, the
indicator is switched over in turn.
HI POWER/ECONO button
This button changes the HIGH POWER/
ECONOMY mode.
TEMPERATURE button
This button sets the room temperature.
(This button changes the present time and
TIMER time.)
ON TIMER button
This button selects ON TIMER operation.
SLEEP button
This button selects to SLEEP operation.
CLEAN switch
This switch changes the CLEAN mode.
CANCEL button
This button cancels the ON timer, OFF
timer, and SLEEP operation.
Unit indication section
Models All models
TIMER light (yellow)
Illuminates during TIMER operation.
RUN (HOT KEEP) light (green)
• Illuminates during operation and CLEAN
operation.
• Blinks at air flow stop due to the 'HOT KEEP'.
1.5 sec.
ON
OFF
0.5 sec.
• The above illustration shows all controls, but in practice
only the relevant parts are shown.
RUN
TIMER
ON / OFF
12
-
Illuminates during HIGH POWER operation.
Illuminates during 3D AUTO operation.
HI POWER
3D AUTO
Unit ON/OFF button
In emergencies, this button can be used for turning on/off the unit
when remote control is not available.
Remote control signal receiver
-
OPERATION MODE select button
Each time the button pushed, the
indicator is switched over in turn.
ON/OFF (luminous) button
Press for starting operation, press again
for stopping.
AIR FLOW (UP/DOWN) button
This button changes the air flow (up/down) mode.
AIR FLOW (LEFT/RIGHT) button
This button changes the air flow (left/right) mode.
3D AUTO button
This button sets 3D AUTO operation.
OFF TIMER button
This button selects OFF TIMER operation.
RESET switch
Switch for resetting microcomputer and
setting time.
ALLERGEN CLEAR button
This button selects ALLERGEN CLEAR
operation.
HI POWER light (green)
3D AUTO light (green)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents