Mitsubishi Heavy Industries SRK20ZG-S Tech Manual page 65

(2) Function setting method
(a) Stop the air conditioner
(b) Press the SET and MODE buttons simultaneously
for 3 seconds or longer.
The screen display will be switched as follows:
" SELECT ITEM"
" SET"
"FUNCTION SET
FUNCTION SET
(c) Press the SET button.
The unit will enter the function setting mode. The
screen display will charge to "
".
(d) Check which category your desired setting belongs to, "
FUNCTION " (Indoor unit function).
(e) Press either or
Select either " FUNCTION
FUNCTION
(f) Press the SET button.
When " FUNCTION
1 "DATA LOADING" (blinking)
SET" (Function number: A, Function description: B)
"01 GRILLE
The screen display will be switched like this.
2 Press either or
"Function number: A, Function description: B "from the list of remote control unit functions will be displayed one by
one. Select a desired function.
3 Press the SET button.
The screen display will be switched as follows:
" SETTING"
4 Press either
or
A list of "Settings: C" will be displayed one by one. Select your desired setting.
5 Press the SET button.
The selected setting is displayed
for 2 seconds, then followed by
"SET COMPLETE" and the
function setting process is com-
pleted.
Then the screen display will be
swiched to "Function number:
A, Function description: B," so
if you want to continue to set an-
other function, repeat the steps as
explained above.
To finish the function setting pro-
cess, please proceed to Step (g).
"
FUNCTION
button.
" or "I/U FUNCTION
I/U FUNCTION
" is selected.
" FUNCTION"
button.
"Setting: C" (ex. "AUTO RUN ON")
button.
* When "
AUTO RUN SET
AUTO RUN ON
AUTO RUN ON
-
Operating guide message
Function description: B , Settting: C
AUTO RUN SET
Selector button
Indoor unit selector button
FUNCTION
".
AUTO RUN SET " is selected.
62
-
Function number: A
Previous screen button
(Remote control unit function)" or "I/U
Function number: A
Function description: B
Setting: C
AUTO RUN OFF
SET COMPLETE
Confirm Button
Finish Button
Start Button