To Specify The External Server Authentication Settings - Konica Minolta BIZHUB 420 User Manual

Specifying Settings From the Control Panel
!
Detail
When "Active Directory" is selected under "External Server Authentica-
tion", specify a password with one character or more. If a password is not
specified, authentication will fail.
Do not use " " "and "+" in the external server password. For details on the
operating conditions of an external server, ask the network administrator.
If "Password Rules" is enabled, a password with less than 8 characters
cannot be registered. For details on the password rules, refer to User's
Guide [Copy Operations].
To perform user authentication by using an external server, touch [ON
(External Server)], and then specify the server type. Up to 20 servers can
be registered in "Active Directory".
When "Active Directory" is specified, [Domain Name] is displayed in the
User Authentication screen and you can log in by selecting a server from
the servers registered in "Active Directory".

To specify the external server authentication settings

1
Display the Administrator Setting screen.
2
In TCP/IP Setting screen 2/5 from the Network Setting screen, specify
the following settings.
– IP Address
– Subnet Mask
– Default Gateway
bizhub 500/420
3
3-139