Konica Minolta BIZHUB 420 User Manual page 55

2
1
Press the [Scan] key on the control panel.
The Scan mode screen appears.
2
Touch [Program].
The selected destinations are listed under "Broadcast Destinations".
Other destination addresses can be added using the address book or
through direct input.
Only the destinations that can be specified are displayed. For example,
fax destinations are not displayed.
3
Touch [Scan Settings] to check the specified scan settings. The spec-
ified settings can also be changed.
2-20
Scan
Scanning Documents
bizhub 500/420