Dinli DMX 450 Owner's Manual page 98

OWNER'S MANUAL
7-8-3. HAND BRAKE
1. To check the hand brake system, place vehicle on a level surface and level the handlebars.
2. Inspect the fluid level through the inspection window in the master cylinder reservoir.
The fluid should be above the "LOWER" make on reservoir body. Add fluid if necessary.
3. To add, wipe any dirt or debris from the master cylinder housing and cover.
4. Remove the hand brake master cylinder cover screws, cover, and diaphragm
(1) Inspection window
(2) "LOWER" mark
98