Dinli DMX 450 Owner's Manual page 85

7-5-1. ADDING FUEL
1. Make sure the engine is stopped.
2. Remove the main switch key.
3. Remove the fuel cap and fill the fuel tank with the specified fuel to the correct level.
4. Reinstall fuel tank cap and tighten it securely.
5. Make sure the fuel cap hose is routed correctly.
7-5-2. IDLE SPEED ADJUSTMENT
The idle speed adjustment screw is located on the carburetor body. It is accessible from the left side of the vehicle. A
special diagnostic tool is necessary to read (display) the engine rpm.
For this reason, idle adjust should be left to a DINLI service technician.
1. To adjust the idle, allow the engine to reach operating
Temperature 158℉ (60℃)
2. Set the idle speed by turning the adjuster (1) in direction (a)
Increase idle speed, or direction (b) to decrease idle speed.
(1) Adjuster
(a) Increase (clockwise)
(b) Decrease (counterclockwise)
85