Dinli DMX 450 Owner's Manual page 5

NOISE REGULATION
TAMPERING WITH NOISE CONTROL SYSTEM PROHIBITED
The CE Directives and U.S. federal law prohibits the following acts or the causing there of;
(1) The removal or rendering inoperative by any person, other than for purposes of maintenance, repair or
replacement, of any device or element of design incorporated into any new vehicle for the purpose of noise
control prior to its sale or delivery to the ultimate purchaser or while it is in use; or (2) the use of the vehicle after
such device or element of design has been removed or rendered inoperative by any person.
AMONG THOSE ACTS PRESUMED TO CONSTITUTE TAMPERING ARE THE ACTS LISTED BELOW:
1. Removing, puncturing, or altering of the muffler, the baffle system, header pipes, or any other component which
conducts exhaust gases.
2. Lack of proper maintenance.
3. Replacing, altering, modifying any moving part of the vehicle or parts of the exhaust, intake (e.g. air filters) with
parts other than those specified by the manufacturer.
Limitations
All information in this Owner's Manual is based upon the latest product data and specifications available at the
time of printing. Dinli Metal Industrial Co., Ltd. reserves the right to make product changes and improvements which
may affect illustrations, photographs and explanations contained in this Owner's Manual. No part of this publication
may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, (electronic mechanical
photocopying, recoding or otherwise), without the prior written permission of Dinli Metal Industrial Co., Ltd. All the
procedures and specifications found in this publication are subject to change with out prior notice and without Dinli
Metal Industrial Co., Ltd. incurring any obligation. The illustrations in this publication are intended for reference use
only and may not depict the actual model or component parts. Your model may differ.
5