Pre-Ride Checklist - Dinli DMX 450 Owner's Manual

PRE-RIDE CHECKLIST

ITEM CHECK
Apparel
Condition of (helmet, eye protection, boots, gloves, long-sleeved shirt and long trousers).
Proper operation, fluid levels, hand break lever free-play, leaks.
Brakes
Fill with DOT4 brake fluid if necessary.
Clutch
Proper operation, condition, and lever free-play, actuating arm position
Coolant
Coolant level, fill with coolant if necessary.
Clean and lubricate the drive chain. Check drive chain slack, sprockets, swing arm buffer, rollers, and
Drive
guide block.
＊Oil level. Fill with engine oil if necessary.
Engine
Fuel
Fuel level. Fill with fuel if necessary.
Wheels/Tires
Wheels (for damage), tire pressures (all four) and condition. Replace if damaged. Add air required.
Steering
Handlebars turn freely; no binding of the cables/hoses throughout the full steering range.
Inspect the frame, sub-frame, and swing arm for bending, cracks, or other damage. Don't ride if
Chassis (frame)
damage is found.
Fenders, covers,
Secure, tightness
Bolts/Fasteners
Lights
Proper operation (headlights, taillight and turning lights).
Throttle Proper operation, condition lever freeplay
Battery
Check connections
※If you have any doubt, not understanding or difficulty in inspection or adjustment with this quad, we
suggest to contact the nearby service point or a Dinli's dealer.
PAGE
－
96 – 102
50
92 – 95
－
87 – 91
47, 84, 85
116 – 121
43
81 – 83
－
28– 31
105, 106
40, 41, 86
107, 108,
134 – 136
61