Dinli DMX 450 Owner's Manual page 94

OWNER'S MANUAL
7-7-2. CHECKING THE COOLANT LEVEL
1. Make sure the engine and radiator are completely cold.
2. Observe the coolant level in the recovery bottle without opening the cap. The level should be between "FULL" and
"ADD" mark
7-7-3. ADDING COOLANT
1. To add coolant, make sure the engine is cold.
2. Place a thick rag over the coolant bottle cap and open it very slowly to allow any residual pressure to escape.
Then, remove cap and slowly add the specified coolant using a clean funnel until it reaches the "FULL" mark.
3. Reinstall the cap and check coolant system for leaks
94
"FULL" & "ADD" mark
FULL
ADD