Troubleshooting - Dinli DMX 450 Owner's Manual

11. TROUBLESHOOTING

NOTE:
The troubleshooting items listed here are provided as a rough guide to assist in some of the more
common difficulties. For more complete systems troubleshooting, consult the vehicle service manual.
PROBLEM
Engine turns over but will not start or is
hard to start.
Engine will not turn over.
POSSIBLE CAUSE
Fuel deterioration, water in fuel or
No fuel in tank.
Fouled or defective spark plug
Low compression
Low battery voltage.
The terminals are loose or corroded.
No spark to spark plug
Overuse of chock
Battery voltage is low or the terminals are
loose.
Fuse blown.
Ignition is in the "OFF" position
SOLUTION
Drain fuel and replace with fresh fuel
Turn fuel valve to reserve, refuel
Inspect plug, replace if necessary
Piston ring is worn or stuck cylinder is
worn.
See you Dinli dealer.
Charge and/or clean the battery.
Inspect plug, verify switch is on.
Inspect, clean and / or replace spark plug.
Charge the battery or secure the terminals.
Replace the blown fuse.
Turn the ignition to the "ON" position
127