Dinli DMX 450 Owner's Manual page 108

OWNER'S MANUAL
Keep battery terminals and connections free of corrosion. If cleaning is necessary, remove the corrosion with a stiff
wire brush. Wash with a solution of one tablespoon baking soda and one cup water. Rinse well with tap water and
dry off with clean shop towels. Coat the terminals with dielectric grease or petroleum jelly
Battery storage
When the vehicle is placed in storage for three months or more, the battery should be removed and stored out of the
sun in a cool, dry place. Test and recharge the battery monthly and before reusing.
Battery charging
The most important parts if maintaining a sealed battery is keeping it fully charged. The battery included with your
quad is sealed and the sealing strip cannot be removed. USE a voltmeter or multi-meter to measure DC voltage. A
fully charged battery will register 14 V or higher. If the voltage is less than 14 V, recharge it
NOTE:
Always verify battery condition before and 1-2 hours after charging.
108