Dinli DMX 450 Owner's Manual page 95

7-7-4. CHANGING THE COOLANT
1. Make sure the coolant system is completely cold and you are wearing safety glasses and protective rubber gloves.
Have a few clean rags handy to wipe up any spills.
2. Remove the clip.
3. Remove coolant recovery bottle tube to allow coolant to drain completely. Reinstall the tube and clip.
4. Add the specified coolant at the bottle until it reaches the LEVEL mark on the bottle.
When reading this manual, remember:
WARNING !
Indicates a potential hazard that COULD result in serious injury or death.
95