Register Ip Devices From The Telephone - Mitel 3300 Technician's Handbook

- Enter the MAC address.
3. In the Feature Access Codes form (optional)
- Assign a code to Direct Page Paging.
4. Multiline Set Keys form (optional)
- Program a Paging key.
5. Interconnect Restriction Table
- Ensure that the station is not restricted from Paging.
To program Group Page with the IP Paging Unit (This programming
procedure does not provide a ring burst prior to the speech broadcast):
1. Multiline IP Sets form
- Program the IP Paging Unit as "5010 IP".
- Program the MAC address.
2. Page Groups form
- Complete all required fields.Symbol Wireless Phones should not
be programmed into paging groups.
3. Class of Service Options form
- Set the Group Page Accept field to "Yes" for the IP Paging Unit.
- Ensure that each telephone in the paging group has the Group
Page Allow field set to "Yes".
4. Feature Access Codes form (optional)
- Assign a Direct Page feature access code.
5. Multiline Set Keys form (optional)
- Program a Paging key.
6. Interconnect Restriction Table
- Ensure that the station is not restricted from Paging.

Register IP Devices from the Telephone

Use this procedure to register IP devices with the 3300 ICP database. The
procedure will program the 3300 ICP database with the MAC address of
the IP device.
Tip: Use the System Administration Tool to complete all other set
programming (for example, Class of Service, Interconnect Restriction, Set
Key Assignments, and Class of Restriction).
Installation and Programming
67