Removing The Cylinder Head - Yamaha F2.5A Service Manual

Removing the cylinder head

1. Remove the cylinder head cover bolts in
the sequence shown.
6
3
4
2. Remove the crankcase bolts 1.
1
3. Remove the cylinder head bolts in the
sequence shown.
3
1
CAUTION:
Do not scratch or damage the mating sur-
faces of the cylinder head and cylinder
block.
4. Remove the cylinder head, and then
remove the push rods.
69M3E11
2
1
5
S69M5260
S69M5270
2
4
S69M5280
NOTE:
Insert a flat head screwdriver between the
tab of the cylinder and the tab of the cylinder
head to pry open the two parts.
5. Remove the rocker arm pivot 2, rocker
arm 3, and push rod guide 4.
Cylinder head
1
2
S69M5290
3
4
5
6
7
8
9
5-14