Removing The Propeller Shaft Housing Assembly; Disassembling The Propeller Shaft Assembly; Disassembling The Propeller Shaft Housing; Checking The Propeller Shaft Housing - Yamaha F2.5A Service Manual

Removing the propeller shaft
housing assembly
1. Remove the bolts 1, and then pull out
the propeller shaft housing assembly 2.
NOTE:
Insert a flat head screwdriver 3 into the slit
between the sealing surfaces of the lower
case to pry open the two parts.
Disassembling the propeller shaft
assembly
1. Remove the shift plunger 1, then the
dog clutch 2, washer 3, and spring 4.
NOTE:
To remove the dog clutch, push the spring
down with a flat head screwdriver 5.
Disassembling the propeller shaft
housing
1. Remove the oil seals 1.
69M3E11
Propeller shaft housing
2. Remove the bushing 2.
Bushing attachment 3:
90890-06650
Driver rod L3 4: 90890-06652

Checking the propeller shaft housing

1. Clean the propeller shaft housing using a
soft brush and cleaning solvent, and then
check it for cracks or damage. Replace if
necessary.
1
2
3
4
5
6
7
8
9
6-8