3. Remove the sheave drum 4.
WARNING
The spiral spring can pop out. Pull the
starter rope, and then pull out the sheave
drum.
4. Remove the spiral spring 5 from the
sheave drum.
WARNING
The spiral spring can pop out. To remove
the spring, cover it with cloths.
5. Remove the starter rope 6.
69M3E11
Checking the spiral spring
1. Check the spiral spring for cracks, bends,
4
S69M5090
Assembling the manual starter
1. Pass the starter rope 1 through the
5
S69M5100
NOTE:
• Tie a knot at the end of the starter rope as
• Be sure to leave 5–10 mm at the end a of
6
S69M5110
or damage. Replace if necessary.
starter case 2, and then install the
starter rope to the sheave drum 3 and
manual starter handle 4.
a
3
1
shown in the illustration.
the starter rope.
Power unit
S69M5120
2
4
a
S69M5B30
5-8
1
2
3
4
5
6
7
8
9