Yamaha F2.5A Service Manual page 98

POWR
5. Install the flywheel magnet 9 and starter
pulley 0, and then tighten the flywheel
magnet nut to the specified torque.
CAUTION:
Apply force in the direction of the arrows
shown, to prevent the flywheel holder
from slipping off easily.
NOTE:
Apply engine oil to the flywheel magnet nut
before installation.
Flywheel holder A: 90890-06522
Flywheel magnet nut:
44 N·m (4.4 kgf·m, 32.4 ft·lb)
6. Install the flywheel magnet cover B and
manual starter C.
5-37
Power unit
A
0
9
S69M5A80
69M3E11