Yamaha F2.5A Service Manual page 70

POWR
2. Wind the starter rope 1 2 times around
the sheave drum 3 in the direction of the
arrow shown in the illustration.
3
NOTE:
After winding the starter rope around the
sheave drum, install the starter rope in the
notch b.
3. Wind the spiral spring 5.
WARNING
When winding the spiral spring, cover it
with cloths.
4. Install the spiral spring 5 into the sheave
drum 3.
3
5-9
Power unit
1
b
1
3
S69M5B40
5
S69M5B50
5
c d
S69M5B60
NOTE:
Bend the outer end c of the spiral spring
onto the cutout d of the sheave drum.
5. Install the sheave drum 3 into the starter
case 2.
3
NOTE:
Install the sheave drum so that the inner end
e of the spiral spring can be bent onto the
cutout f of the starter case.
6. Install the drive pawls 6 and drive plate
7.
7
6
7. Pull the starter rope 1 in the direction of
the arrow shown in the illustration, turn
the sheave drum 3 3 times, and then
remove the starter rope from the notch
g.
e f
2
S69M5B70
6
S69M5B80
69M3E11