Change A One-To-One Ptt Call To An Intercom Call; Answer An Incoming Call During A Ptt Call - AT&T CLP99183 User Manual

Multiple handset use
Push-to-talk (PTT)

Change a one-to-one PTT call to an intercom call

You can convert a one-to-one PTT session to an intercom call.
Using a handset or the telephone base:
When your device shows Press and hold [PTT] to talk, press
1.
INTCOM. The screen shows Switch to Intercom?
2. Press SELECT. Your device displays Calling BASE 0 or
Calling HANDSET X. The destination device briefly shows Push to
talk Ended and then HANDSET X is calling or BASE 0 is calling. The
destination device rings.
HOME/
3. Press
destination handset, or press
) on the telephone base to answer the intercom call. Both devices now
show Intercom.
4. To end the intercom call, press
the handset in the telephone base or charger, or press
telephone base. Both screens show Intercom ended.

Answer an incoming call during a PTT call

When you receive an outside call during PTT, there is an alert tone.
Using a handset or the telephone base:
• During a one-to-one PTT, press
the initiating or destination handset, or press
CELL 2 on the telephone base. The PTT call ends automatically and the
outside call is answered.
• During a one-to-group PTT call, press
CELL 2 on the initiating handset, or press
CELL 2 on the telephone base. The PTT call ends automatically and the
outside call is answered.
• During a one-to-group PTT call, press
CELL 2
on any one of the destination handsets or telephone base. That
device answers the outside call. The PTT call continues for the rest of the
PTT participants.
• To leave the PTT call without answering the incoming call, press
OFF/
CANCEL
telephone continues to ring.
or any dialing keys (0-9, or TONE ) on the
FLASH
on your handset or CANCEL on your telephone base. The
HOME or any dialing keys (0-9, or TONE
OFF/
CANCEL
HOME/
FLASH,
HOME/
HOME
HOME/
79
on your handset or place
END on the
CELL 1 or
HOME CELL 1 or
,
CELL 1 or
FLASH,
CELL 1 or
,
, CELL 1 or
FLASH
CELL 2
on