AT&T CLP99183 User Manual page 68

Telephone operation
Redial
You can also select a redial entry before dialing.
Press REDIAL/
1.
2. Press q , p
CID
number displays. The handset beeps twice at the end of the list.
HOME/
3. Press
CELL 1, CELL 2
-OR-
You can insert the area code to the redial number before dialing.
1. Enter the area code in idle mode, then press REDIAL/
2. Press q , p
CID
number displays, then press INSERT. The area code will be added in front
of the selected redial number.
3. Press HOME/
CELL 1, CELL 2
To dial a redial entry on the telephone base:
1. Press HOME to use the home line, then press REDIAL/
redial list.
2. Press q
CALLER ID
the desire number displays. The handset beeps twice at the end of the list.
DIAL
3. Press to dial the number displayed.
-OR-
1. Press CELL 1 or
to enter the redial list.
2. Press q
CALLER ID
the desire number displays. The handset beeps twice at the end of the list.
3. Press INSERT
DIAL
4. Press to dial the number displayed.
in idle mode.
PAUSE
or REDIAL/
DIR PAUSE
/SPEA�ER to call using the home line,
, or
FLASH
to call using the cell
REDIAL/
or
DIR PAUSE
, or /SPEA�ER to call using the home line,
FLASH
to call using the cell
, p
DIRECTORY
CELL 2 to use the cell line, then press REDIAL/
, p
DIRECTORY
to insert the desired number.
repeatedly to browse until the desired
line.
repeatedly to browse until the desire
line.
REDIAL/
or
PAUSE
REDIAL/
or
PAUSE
62
.
PAUSE
to enter the
PAUSE
repeatedly to browse until
repeatedly to browse until
or
or
PAUSE