Bluetooth Setup; Add A Cell Phone - AT&T CLP99183 User Manual

Bluetooth

Bluetooth setup

To use a Bluetooth enabled cellular phone with your telephone, you must
first pair and connect your Bluetooth cellular phone with the telephone base.
The CLP99183/CLP99283/CLP99353/CLP99383/CLP99453/CLP99483/
CLP99553/CLP99583 can then be used to make or answer calls on the cell
phone line.
Bluetooth wireless technology operates within a short range (up to 30 feet).
When you pair a Bluetooth cell phone or Bluetooth headset to the telephone
base, keep the device within 15 feet of the telephone base for optimal
performance.

Add a cell phone

Before you begin, make sure that you have cellular coverage and your
Bluetooth enabled cell phone is not connected to any other Bluetooth
device. Refer to your cell phone user's manual to learn how to search for or
add new Bluetooth devices.
To pair and connect a cell phone:
1. Press MENU
enter the main menu.
2. Press
q
CALLER ID
then press SELECT.
SELECT
3. Press
4. Press SELECT
displays Please wait... followed by 1. If cell is
connected to BT device, please disconnect it.
• If there are already 4 paired devices on the device
list, the 4th device on the device list will be
automatically removed, regardless of whether the
new device pairing is successful or
• If there are already 2 active devices on the device
list with prefix D1: or D2:, the telephone base shows
Cell Phone A is deactivated for adding a new
device.
5. Press NEXT. The screen displays 2. Place cell phone
next to base.
• All devices that are connected to the telephone base are disconnected
until the pairing process is completed.
on the telephone base in idle mode to
or
p
DIRECTORY
to choose Add device.
to choose Add cellular. The screen
to highlight Bluetooth,
not.
20
Diretory
Caller ID log
Intercom
Bluetooth
p
SELECT
BACK
q
BLUETOOTH
Add device
Device list
Download dir
p
BACK SELECT
q
ADD DEVICE
Add cellular
Add headset
p
BACK SELECT
q
Set cell to
search base:
AT&T DECT 6.0
PIN:0000