AT&T CLP99183 User Manual page 27

Bluetooth
Bluetooth setup
6. Press NEXT to turn on the telephone base discoverable mode. The screen
displays Set cell to search base: AT&T DECT 6.0 PIN: 0000. Promptly turn
on the Bluetooth feature of your cell phone and search for or add new
devices.
7. Once your cell phone finds your AT&T phone (AT&T DECT 6.0), press the
appropriate key on your cell phone to continue the pairing process.
• Your cell phone may require a passcode. In this case, the telephone
base displays Check cellular. ENTER PASS CODE. Enter the cell phone
passcode (typically 0000) into the telephone base and press SET.
Enter the PIN of the telephone base (the default PIN is 0000) into your
•
cell phone to continue the pairing process if required. The telephone
base displays Adding Cell Phone A.
8. When a device is successfully connected,
Cell Phone A is added and connected to base and
status icon (
telephone base (CELL 1 or CELL 2/HEADSET ) turns on.
If you have trouble pairing your cell phone, it may not be compatible
with your CLP99183/CLP99283/CLP99353/CLP99383/CLP99453/
CLP99483/CLP99553/CLP99583. Check the Bluetooth compatibility list
www.telephones.att.com/bluetooth
at
NOTES:
• The pairing process may take up to one minute. If the pairing process fails, try again.
• The steps for the pairing process may vary for different cell phones. If this happens, follow
the prompts on your cell phone and your CLP99183/CLP99283/CLP99353/CLP99383/
CLP99453/CLP99483/CLP99553/CLP99583 to complete the pairing process.
• Refer to the user's manual of your cell phone on how to search for or add a new Bluetooth
device.
1 or 2 ) displays. The corresponding device light on the
the telephone base displays
.
21
the corresponding