Getting started
Battery installation and charging
CHARGE light
After you install your telephone or power returns following a power outage,
the handset and telephone base will prompt you to set the date and
time. For instructions, see Set date/time on page 36. To skip setting the
date and time, press
telephone base.
IMPORTANT INFORMATION
Use only the supplied rechargeable battery or replacement battery (model BT183342) .
•
To order, visit our website at
1 (800) 222-3111
•
If you do not use the handset for a long time, disconnect and remove the battery
to prevent possible leakage.
Step 3
Charge the handset by placing it face forward
in the telephone base or charger. The CHARGE
light on the handset is on during charging.
/CANCEL on the handset or CANCEL on the
OFF
www.telephones.att.com
.
In Canada, dial
12
1 (866) 288-4268
or call
.