Figure 83. Carefully Unplug Connections To The Board - Ioline FlexJet Service Manual

84 Ioline FlexJet Service Manual
Caution
When removing the new
logic board from the
packaging make sure you
have the static grounding strap
on correctly. If there is a static
discharge to the new board it may
not function properly. The strap is
included in the replacement kit.
Support the logic board hand when removing the last screw to
prevent it from falling onto the floor. (Figure 83.)
Logic
board
screws

Figure 83. Carefully unplug connections to the board.

6. Pull the edge opposite the serial port out first. (Do NOT force
it.) Then pull the PCB away from the rear so the serial port con-
nection is not damaged.
Figure 84. Carefully remove the logic board.
7. Remove the new logic board from it's packaging.