Figure 37. The Ink Stall Can Crack If The Cartridge Door Is Not Closed And Locked; Ink Cartridge Stall Problems; Noisy Carriage Movement - Ioline FlexJet Service Manual

Flexjet
Hide thumbs Also See for FlexJet:
Table of Contents

Advertisement

50
Ioline FlexJet Service Manual

Ink cartridge stall problems

Always remember to close and lock the cartridge doors after remov-
ing or replacing an ink cartridge. Failure to do so can cause cracks in
the bottom of the ink cartridge stall. When the carriage tries to cap
in the service station, the doors hit the service station end plate. A
cracked stall can cause print mis-alignment that is difficult to calibrate.

Figure 37. The ink stall can crack if the cartridge door is not closed and locked.

Noisy carriage movement

If you notice unusual noise coming from the carriage, the wheel on
the carriage assembly may need cleaning or replacement. Remove
the carriage assembly from the traverse and clean the wheel. Also
wipe the traverse rails before re-installing the carriage assembly. If
cleaning does not resolve the noise, contact Ioline Customer Service.
Figure 38. If the carriage makes noise, you may need to clean or replace the wheel.

Advertisement

Table of Contents
loading

Table of Contents