70
Ioline FlexJet Service Manual
Caution
The logic board cover will
swing down when the last
screw is removed. Make
sure to support it with one hand
and let it slowly rotate.
Loosen this
/
-in screw
9
64
Figure 55. Install the carriage cover.
Step 4: Remove the logic board cover
1.
Remove the four screws that hold the sheet metal logic board
cover plate. (Figure 56.)
2.
Put static strap on. (See Caution in margin on page 69.)
Remove screws
2 - Front
Short screw
2 - Rear (Shown)
Figure 56. Remove the logic board cover plate.