Raymarine e7 User Reference page 80

Note: An active route can be edited, with the exception of the
active waypoint. If a waypoint being edited becomes active, then
the system shall cancel the edit; the waypoint shall remain in
its original position.
Showing or hiding a route
From the chart application:
1. Select Menu.
2. Select My Data.
3. Select Display My Data.
4. Select Select Routes To Display.
The display routes dialog is displayed.
5. Select the route to switch between Show and Hide.
Selecting a route to review or edit
1. Do one of the following to select the required route:
• With the chart application active, select a route on screen to
display the route context menu.
• With the chart application active, select: Menu > My Data >
Route List and select the required route from the list.
• From the homescreen, select: My Data > Route List and
select the required route from the list.
Adding a waypoint to a route on the chart screen
From the chart application:
1. Select the appropriate leg of the route.
The route context menu is displayed.
2. Select Insert Waypoint.
3. Move the cursor so that it stretches the leg of the route to the
desired position on the chart.
4. Press the Ok button.
80
Removing a waypoint from a route
From the chart application:
1. Select the waypoint you want to erase.
The waypoint context menu is displayed.
2. Select Erase Waypoint.
The erase waypoint pop up message is displayed.
3. Select Yes to confirm or No to cancel the action.
Moving a waypoint within a route
From the chart application:
1. Position the cursor over the waypoint you want to move.
The waypoint context menu is displayed.
2. Select Move Waypoint.
3. Move the cursor so that it stretches the leg of the route to the
desired position on the chart.
4. Press the Ok button to confirm the new location.
Erasing routes
Erasing a displayed route
From the chart application:
1. Select the route.
The Route context menu is displayed.
2. Select Erase Route.
The erase route pop up message is displayed.
3. Select Yes to confirm, or No to cancel the action.
Erasing a route using the route list
From the chart application menu or the homescreen:
1. Select My Data.
2. Select Route List.
The route list is displayed.
3. Select the route you want to erase.
e7 / e7D — User reference