Raymarine e7 User Reference page 66

• Bearing
For inactive waypoints the following menu items are available:
• Goto Waypoint
• Edit Waypoint
• Erase Waypoint
• Move Waypoint
• Measure
• Build Route
For active waypoints the following menu items are available:
• Stop Goto
• Restart XTE
• Measure
• Build Route
•
Waypoint features
There are a range of features for placing, navigating and managing
waypoints.
Waypoint features are accessed from:
• the waypoint context menu — by positioning the cursor over an
existing waypoint on the screen.
• any application — by pressing the WPT button. This displays
the Waypoints menu.
• the chart application — by going to the following menu: Menu
> My Data.
• the homescreen — by going to the following menu: My Data.
Note: Pressing the WPT button from the homescreen will open
the waypoint list.
66
Waypoint placement
Placing a waypoint using touch
From the chart, radar or fishfinder application:
1. Select and hold the required location on screen.
The context menu is displayed.
2. Select Place Waypoint.
Placing a waypoint at the cursor position
From the chart, radar or fishfinder application:
1. Using the joystick move the cursor to the area of the screen
where you want the waypoint to be placed.
2. Press the WPT button.
The waypoint menu is displayed.
3. Select Place Waypoint at Cursor.
The waypoint is placed at the location and a confirmation pop up
message is displayed.
4. Select Ok to confirm waypoint placement, or Edit to edit the
waypoint details.
D11763-2
e7 / e7D — User reference