Raymarine e7 User Reference page 162

Creating a VRM/EBL on the radar display
From the radar application:
1. Select a target on screen.
2. Press the Ok button.
The radar context menu is displayed.
3. Select Place VRM/EBL.
4. Using the joystick adjust the VRM/EBL to the required bearing
and range.
5. Press the Ok button to save the settings.
Note: The first VRM/EBL will be placed at a location of 1/3 of
the current range and 030° relative to your vessel's head. If this
setting is adjusted, the display will retain the adjustments and use
them when the VRM/EBL is next enabled.
Creating a VRM/EBL on the radar display using
touch
From the radar application:
1. Select and hold on the required target.
The radar context menu is displayed.
2. Select Place VRM/EBL.
3. Select the required bearing and range.
4. Press the Ok button to save the settings.
Note: The first VRM/EBL will be placed at a location of 1/3 of
the current range and 030° relative to your vessel's head. If this
setting is adjusted, the display will retain the adjustments and use
them when the VRM/EBL is next enabled.
Creating a floating VRM/EBL on the radar
display
From the radar application with a VRM/EBL already created:
162
1. Position the cursor over the VRM/EBL.
2. Press the Ok button.
The radar context menu is displayed.
3. Use the Rotary Control to select Float Centre.
4. Press the Ok button.
5. Using the joystick, move the center position of the circle to the
desired position.
6. Press the Ok button to confirm the new position.
Note: When creating the first VRM/EBL, it will be placed at a
location of 1/3 of the current range and 030° relative to your
vessel's head. If this setting is adjusted, the display will retain the
adjustments and use them when the VRM/EBL is next enabled.
Creating a floating VRM/EBL on the radar
display using touch
From the radar application with a VRM/EBL already created:
1. Press and hold on the VRM/EBL.
The radar context menu is displayed.
2. Select Float Centre.
3. Press the Ok button.
4. Select the desired location for the center position.
5. Press the Ok button to confirm the new position.
Note: When creating the first VRM/EBL, it will be placed at a
location of 1/3 of the current range and 030° relative to your
vessel's head. If this setting is adjusted, the display will retain the
adjustments and use them when the VRM/EBL is next enabled.
Unfloating a VRM/EBL on the radar display
From the radar application:
1. Position the cursor over the VRM/EBL.
e7 / e7D — User reference