Raymarine e7 User Reference page 67

Placing a waypoint at your vessel's position
In addition to positional information, a waypoint placed at the vessel
position will capture temperature and sounded depth information (if
you have the appropriate sensors connected to your system).
From the chart, radar or fishfinder application:
1. Press the WPT button.
The waypoint menu is displayed.
2. Press the WPT button again.
A confirmation pop up message is displayed.
3. Select Ok to place the waypoint, or Edit to edit the waypoint
details.
Note: Alternatively with the waypoint menu displayed you can
select Place Waypoint At Vessel.
Placing a waypoint at a known position
You can place a waypoint at a specified location using latitude and
longitude coordinates:
1. Press the WPT button.
2. Select Place Waypoint At Lat/Lon.
3. Select the position field.
4. Enter the Latitude/Longitude position.
5. Select SAVE.
6. You can also add a name for the waypoint and add to a group
by selecting the Name and Group fields.
Using waypoints, routes and tracks
Navigation
Navigating to the cursor position on the chart
From the chart application:
1. Position the cursor at the desired destination on the chart.
2. Select Menu.
3. Select Navigate.
4. Select Goto Cursor.
Navigating to the cursor position on the chart using touch
From the chart application:
1. Select and hold on the required location on screen.
The chart context menu is displayed.
2. Select Goto Cursor.
D11764-2
67