Raymarine e7 User Reference page 75

• by using the chart application menu: Menu > Navigate > Follow
Route.
Note: The Route List can also be accessed from the homescreen
by selecting My Data and then Route List.
Route building
A route can consist of a combination of:
• New waypoints which you place on the screen as required and/or
• existing waypoints selected from a list displayed on screen.
Note: A route can also be created from a track.
As each waypoint is added, it is assigned an index number
corresponding to its position in the route and drawn on the chart
using the currently specified symbol. The following should be noted:
• When a route is being built it is not active and does not affect
any current navigation.
• You cannot save a new route if any of the waypoints within it are
currently active.
Building a route using touch
D11762-1
Using waypoints, routes and tracks
From the chart application:
1. Select and hold a location on screen.
The chart context menu is displayed.
2. Select Build Route.
The build route menu is displayed.
3. Select a location on screen to be the starting position.
4. Select relevant locations to place subsequent waypoints in order.
The route is saved and displayed as each waypoint is placed.
5. When complete select Finish Build.
The finish route build pop up message is displayed.
6. Select Follow to immediately follow the route. or
7. Select Edit to change the route name or change the route color.
or
8. Select Exit to save the route and return to the chart application.
Note: If you place a waypoint at the wrong position, select Undo
Waypoint from the Route Menu.
Building a route on the chart
From the chart application:
1. Select Menu.
2. Select Navigate.
3. Select Build Route.
The build route menu is displayed.
4. Select Place Route.
5. Using the Joystick select a location on screen.
6. Press the Ok button to place the first waypoint in the route.
7. Use the Joystick and Ok button to place subsequent waypoints.
The route is saved and displayed as each waypoint is placed.
8. When your route is complete select Finish Build.
The finish route build pop up message is displayed.
75