Display Power; Controls - Raymarine e7 User Reference

3.3 Display power

Powering the display on
1. Press and hold the POWER button until the Raymarine logo
appears.
2. Press OK to acknowledge the disclaimer message.
Powering the display off
1. Press and hold the POWER button until the countdown reaches
zero.
Note: If the POWER button is released before the countdown
reaches zero, the power off is cancelled.
Getting started

3.4 Controls

1. Touchscreen — you can touch the screen to operate many
common functions, including all menu operations.
2. Menu — accesses menus. Press again to close menus.
3. UniControl — provides a joystick and rotary control and an OK
button for using menus and applications.
4. Back — press to return to a previous menu or dialog level.
5. WPTS / MOB — press and release to access the waypoint
options. Press again to place a waypoint. Press and hold to
place a Man Overboard (MOB) marker at your current position.
6. Power — press once to switch the unit ON. Once powered on,
press the Power button again to adjust the brightness, access
the power controls for external devices, and access the autopilot
controls. Press and hold to switch the unit OFF.
7. Chart card slots — open the card door to insert or remove
MicroSD cards. There are 2 card slots (labelled 1 and 2), used
for electronic charts and archiving waypoint, route and track
data.
1
D12179-1
29